Static fittings connect tubing to other tubing, or threaded connections. Barbed connections are a clean, time tested and cost efficient method of connection. The hoop strength of the tube holds around the barbed fitting. Air Logic's first barb is free of a parting line to create a good seal, additional barbs increase holding force for tube retention.
Unit of Measure
Specifications
Brands |
N/A Air Logic |
Color |
N/A Gray |
| Typical Tube Retention Pressure1 | N/A 125 psi8.6 bar |
Base Seal |
N/A Compression |
Connection Type |
N/A Barbed |
Tubing Inside Diameter (ID) |
N/A 1/8 in |
Static or Swivel |
N/A Elbow |
Wetted Material(s) |
N/A Glass Filled Polypropylene |
EU RoHS 2 (Directive 2011/65/EU with amendment (EU) 2015/863) |
N/A Yes |
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) Compliant |
N/A Yes |
Type |
N/A Barbed |
Additional Information |
N/A
Barbed connections are free of lubrication or thread sealant used in other styles of connection. Simply push the tube over the barb and the connection is complete. |
- 1 Subject to tubing specification
