Bulkhead Fittings provide a tubing path through a panel, with connections on both sides. A plastic nut is provided to secure the fitting in place. Air Logic's bulkhead fittings can be used as a tubing adaptor to change the size of the tubing inside the panel vs the tubing outside of the panel.
Unit of Measure
Specifications
Brands |
N/A Air Logic |
Color |
N/A Black |
| Typical Tube Retention Pressure1 | N/A 125 psi8.6 bar |
Connection Type |
N/A Barbed |
Tubing Inside Diameter (ID) |
N/A 0.170 to 1/16 in |
Type |
N/A Bulkhead |
Wetted Material(s) |
N/A Nylon |
Additional Information |
N/A
Barbed connections are a clean, time tested and cost efficient method of connection. The hoop strength of the tube holds around the barbed fitting. Air Logic's first barb is free of a parting line to create a good seal, additional barbs increase holding force for tube retention. Barbed connections are free of lubrication or thread sealant used in other styles of connection. Simply push the tube over the barb and the connection is complete. Air Logic's bulkhead fittings are suited to lightweight, cost conscious and light duty applications. |
Clearance Hole in Panel |
N/A 9/32" |
Retaining Nut Included |
N/A Yes |
- 1 Subject to tubing specification
