Threaded orifices integrate are one of Air Logic's best-selling product lines with a threaded fitting to reduce system complexity. They work on the principal of Flow Restriction with the orifice diameter being identified in the part number. In addition to orifice diameter, Air Logic controls many smaller factors that have an impact on the total restriction of the orifice. This is why Air Logic's orifices are trusted to provide accurate and reliable flow performance across a variety of different markets. All of the Air Logics products are precision molded, assembled and tested in America. Reference the Air Logic 10-32 thread interface and seal guide.
F3120100 Threaded Orifice Kit - Items
Unit of Measure
Specifications
Brands |
N/A Air Logic |
Nominal Orifice Size |
N/A 0.040 in |
Tubing Inside Diameter (ID) |
N/A 1/8 in |
Color |
N/A Black |
Connection Type |
N/A Barbed |
Wetted Material(s) |
N/A Polysulfone (PSU) |
Maximum Pressure |
N/A 125 psi8.6 bar |
| Typical Tube Retention Pressure1 | N/A 125 psi8.6 bar |
Nominal Flow Coefficient (Cv) |
N/A 0.0392 |
Recommended System Filtration |
N/A 73 µm |
Installation Method |
N/A Push-In |
EU RoHS 2 (Directive 2011/65/EU with amendment (EU) 2015/863) |
N/A Yes |
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) Compliant |
N/A Yes |
Type |
N/A Threaded |
Additional Information |
N/A Threaded orifices are Factory tested with the supply air applied to the threaded end. The threaded orifices are error-proofed for assembly direction, since using the product in the indicated direction will improve accuracy of the flow control. Internal orifice color indicates the orifice diameter and part number. Orifices are non-adjustable and tamperproof method of flow control. Integrate the threaded orifice into a system to create a controlled input or output (Example: Flow controlled Regulator, Valve, cylinder, and Manifold port or pump). |
- 1 Subject to tubing specification
