Barbed inline filters protect sensitive devices from contamination in a fluid circuit, either gas or liquid. This plastic filter is a composed of a polypropylene weave in a housing of the same material, and meant for small devices or for larger systems working in tandem with system-wide filtration. There is no flow orientation to the inline filters; the filtered area and canister volume are equal on both sides of the filter. Air Logic polypropylene filters have a large diameter to provide more filtration area.
Specifications
Brands |
N/A Air Logic |
Filter Size |
N/A 105 µm |
Color |
N/A Ocean Blue |
Maximum Pressure |
N/A 125 psi8.6 bar |
| Typical Tube Retention Pressure1 | N/A 125 psi8.6 bar |
Filtration |
N/A 105 µm |
Tubing Inside Diameter (ID) |
N/A 1/8 in |
Connection Type |
N/A Barbed |
Wetted Material(s) |
N/A Polypropylene |
Installation Method |
N/A Push-In |
EU RoHS 2 (Directive 2011/65/EU with amendment (EU) 2015/863) |
N/A Yes |
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) Compliant |
N/A Yes |
Additional Information |
N/A
Barbed connections are a clean, time-tested, and cost-efficient method of connection. The hoop strength of the tube holds around the barbed fitting without needing lubrication or thread sealant; simply push the tube over the barb and the connection is complete. Air Logic's first barb is free of a parting line to create a good seal while the additional barbs increase holding force for tube retention. Inline filters are designed to keep your device functioning by protecting critical components such as valves, gauges, sensors, and flow controls from harmful matter. The polypropylene material that Air Logic utilizes is rated for medical-grade applications based on our standard product compliance, as well as the following agency ratings: - - DMF - - USP 661.1 - - USP 85 - - USP 88 - - USP Class VI |
- 1 Subject to tubing specification
