Swivel fittings connect tubing to a threaded hole. The barb (and tubing) can be freely rotated from the base. A captured O-ring provides a high quality seal against the mating part. Barbed connections are a clean, time tested and cost efficient method of connection. The hoop strength of the tube holds around the barbed fitting. Air Logic's first barb is free of a parting line to create a good seal, additional barbs increase holding force for tube retention.

Request Quote Request a Sample
Unit of Measure
Items
1/16 Inch (in) Tubing Inside Diameter (ID), 10-32 Swivel Straight, Black Swivel Fitting with O-Ring Base Seal (F215080)

Swivel Fitting, 10-32 O-ring Base, Straight 1/16 Inch Barb, Nylon
1/16 Inch (in) Tubing Inside Diameter (ID), 10-32 Swivel Straight, Natural (Opaque) Swivel Fitting with O-Ring Base Seal (F215080PP)

Swivel Fitting, 10-32 O-ring Base, Straight 1/16 Inch Barb, Polypropylene
3/32 Inch (in) Tubing Inside Diameter (ID), 10-32 Swivel Straight, Black Swivel Fitting with O-Ring Base Seal (F215083)

Swivel Fitting, 10-32 O-ring Base, Straight 3/32 Inch Barb, Nylon
3/32 Inch (in) Tubing Inside Diameter (ID), 10-32 Swivel Straight, Natural (Opaque) Swivel Fitting with O-Ring Base Seal (F215083PP)

Swivel Fitting, 10-32 O-ring Base, Straight 3/32 Inch Barb, Polypropylene
1/8 Inch (in) Tubing Inside Diameter (ID), 10-32 Swivel Straight, Black Swivel Fitting with O-Ring Base Seal (F215085)

Swivel Fitting, 10-32 O-ring Base, Straight, 1/8 Inch Barb, Nylon
Description N/A Swivel fittings connect tubing to a threaded hole. The barb (and tubing) can be freely rotated from the base. A captured O-ring provides a high quality seal against the mating part. Barbed connections are a clean, time tested and cost efficient method of connection. The hoop strength of the tube holds around the barbed fitting. Air Logic's first barb is free of a parting line to create a good seal, additional barbs increase holding force for tube retention.
Brands N/A Air Logic
Material N/A N/A Polypropylene (PP) N/A N/A Polypropylene (PP) N/A
Elastomers Available N/A Buna-N (Standard) Ethylene Propylene Diene Monomer (EPDM) Fluoroelastomers (FKM) Silicon (Si)
Color N/A Black N/A Natural (Opaque) N/A Black N/A Natural (Opaque) N/A Black
Typical Tube Retention Pressure1 N/A 125 psi8.6 bar
Base Seal N/A O-Ring
Connection Type N/A Barbed
Tubing Inside Diameter (ID) N/A 1/16 in N/A 1/16 in N/A 3/32 in N/A 3/32 in N/A 1/8 in
Type N/A 10-32 Swivel Straight
Wetted Material(s) N/A Elastomer Nylon N/A Elastomer Polypropylene N/A Elastomer Nylon N/A Elastomer Polypropylene N/A Elastomer Nylon
Additional Information N/A Barbed connections are free of lubrication or thread sealant used in other styles of connection. Simply push the tube over the barb and the connection is complete.

This product may be integrated into other Air Logic products such as check valves, filters, switches and regulators. Custom materials may be available upon request.

Swivel products enable the production of tubing assemblies that can be made complete with fittings. This enables error-proofing in manufacturing where critical tubing assemblies must be connected correctly. Swivel products also relieve stress on tubing due to moving or re-positioning.
  • 1 Subject to tubing specification