Threaded inline filters protect sensitive devices from system contamination in a pneumatic or liquid circuit. These filters have a flat stainless-steel weave meant for small devices or for larger systems working in tandem with system-wide filtration. There is no flow orientation to the inline filters; the filtered area and canister volume are equal on both sides of the filter. Protect your circuit from assembly debris such as Teflon tape, broken O-rings, and machining chips. This product combines well with Air Logic's fitting product line for application-specific requirements like swivel capability and replaceable filter applications.

Request Quote Request a Sample Search by Specification
Unit of Measure
Items
25 Micrometer (µm) Filter Size Threaded In-line Air Filter (F97025)

25um (Micron, µm) Threaded Inline Filter, 10-32 Threads
25 Micrometer (µm) Filter Size B80 Barb Threaded In-line Air Filter (F97025B80)

25um (Micron, µm) Threaded Inline Filter, 1/16 Inch Pre-Installed Barbs
25 Micrometer (µm) Filter Size B85 Barb Threaded In-line Air Filter (F97025B85)

25um (Micron, µm) Threaded Inline Filter, 1/8 Inch Pre-Installed Barbs
25 Micrometer (µm) Filter Size B86 Barb Threaded In-line Air Filter (F97025B86)

25um (Micron, µm) Threaded Inline Filter, .170 Inch Pre-Installed Barbs
43 Micrometer (µm) Filter Size Threaded In-line Air Filter (F97043)

43um (Micron, µm) Threaded Inline Filter, 10-32 Threads
Description N/A
  • Threaded inline filters protect sensitive devices from system contamination in a pneumatic or liquid circuit. Filters are a flat stainless steel weave meant for small devices or for larger systems working in tandem with system-wide filtration. There is no flow orientation to the inline filters, the filtered area and canister volume are equal on both sides of the filter. Threaded inline filters offer the largest filtered area in Air Logic's offerings.
  • Threaded inline filters are commonly used to protect against debris generated inside of a system or device. Ex. Teflon tape debris during assembly, broken o-rings from valves, machining chips from threads.
  • Threaded connections are a convenient way to connect in a variety of applications. This product combines well with Air Logic's fitting product line for application specific requirements like swivel capability, and replaceable filter applications.
Brands N/A Air Logic
Thread Size N/A
Filter Size N/A 25 µm N/A 25 µm N/A 25 µm N/A 25 µm N/A 43 µm
Color N/A Light Blue
Maximum Pressure N/A 125 psi8.6 bar
Typical Tube Retention Pressure1 N/A N/A 125 psi8.6 bar N/A 125 psi8.6 bar N/A 125 psi8.6 bar N/A
Filtration N/A 25 µm N/A 25 µm N/A 25 µm N/A 25 µm N/A 43 µm
Nominal Flow Coefficient (Cv) N/A
Tubing Inside Diameter (ID) N/A N/A 1/16 in N/A 1/8 in N/A 0.170 in N/A
Connection Type N/A Threaded N/A Barbed N/A Barbed N/A Barbed N/A Threaded
Wetted Material(s) N/A Polysulfone (PSU) Stainless Steel (SS) N/A Nylon Polysulfone (PSU) Stainless Steel (SS) N/A Nylon Polysulfone (PSU) Stainless Steel (SS) N/A Nylon Polysulfone (PSU) Stainless Steel (SS) N/A Polysulfone (PSU) Stainless Steel (SS)
Installation Method N/A N/A Push-In N/A Push-In N/A Push-In N/A
Connection Size N/A 10-32 Threads N/A N/A N/A N/A 10-32 Threads
EU RoHS 2 (Directive 2011/65/EU with amendment (EU) 2015/863) N/A Yes
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) Compliant N/A Yes
Additional Information N/A

This filter is well suited to filtering media entering or leaving a critical device. Integrate the threaded filter into a system to create a filtered input or output. Ex. Regulator, Valve, cylinder, or pump.

Threaded in-line filters are commonly used to protect against debris generated inside of a system or device. Ex. Polytetrafluoroethylene (PTFE) tape debris during assembly, broken O-rings from valves, machining chips from threads.
  • 1 Subject to tubing specification