• This vacuum switch uses a smaller micro switch that has small terminals coming out the top. The Differential is lower and electrical cycle life is longer than the standard F5100 switches, however the overall amperage rating is lower.
  • Vacuum switches apply signal pressure to a diaphragm that is opposed by a spring force. When then vacuum signal force is greater (deeper vacuum = more force) than the spring force it reaches its set-point (also called “On” pressure), the internal mechanism moves and changes the electrical state.
  • When the switch trips, the normally open circuit closes and the normally closed circuit opens. The switch will remain in this state until the vacuum signal drops below its reset point (also called “Off” pressure).
  • The difference between the “On” pressure and the “Off” pressure is defined as the Differential or Hysteresis of the switch. This is an important characteristic for applications such as vacuum switch-controlled vacuum pump systems. For instance, the consumption and capacity of the system along with the differential of the switch will determine how often the pump runs.
  • Factory preset options are available. Please contact your salesperson or distributor for specifications and a custom part number.
  • Adjustments can be made to the switch by removing the round cover and turning the flat head screw. Clockwise adjustments will lower the Set point (bring the setpoint closer to atmosphere). Counter clockwise adjustments will raise the setpoint (take the setpoint deeper into vacuum). Adjusting preset switches is not recommended. Do not back out the flat head screw above flush with the body.
Request Quote
Unit of Measure
Items
V-5300 Series Low Differential Vacuum Switch

Flush Mount Low Differential Vacuum Switch 5" Hg 0.1 AMP
V-5300 Series Low Differential Vacuum Switch

Flush Mount Low Differential Vacuum Switch 5" Hg 4 AMP
V-5300 Series Low Differential Vacuum Switch

Panel Mount 1/8-27 NPS Low Differential Vacuum Switch 5" Hg 0.1 AMP
V-5300 Series Low Differential Vacuum Switch

Panel Mount 1/8-27 NPS Low Differential Vacuum Switch 5" Hg 4 AMP
V-5300 Series Low Differential Vacuum Switch

Manifold Mount Low Differential Vacuum Switch 5" Hg 0.1 AMP
Description N/A
  • This vacuum switch uses a smaller micro switch that has small terminals coming out the top. The Differential is lower and electrical cycle life is longer than the standard F5100 switches, however the overall amperage rating is lower.
  • Vacuum switches apply signal pressure to a diaphragm that is opposed by a spring force. When then vacuum signal force is greater (deeper vacuum = more force) than the spring force it reaches its set-point (also called “On” pressure), the internal mechanism moves and changes the electrical state.
  • When the switch trips, the normally open circuit closes and the normally closed circuit opens. The switch will remain in this state until the vacuum signal drops below its reset point (also called “Off” pressure).
  • The difference between the “On” pressure and the “Off” pressure is defined as the Differential or Hysteresis of the switch. This is an important characteristic for applications such as vacuum switch-controlled vacuum pump systems. For instance, the consumption and capacity of the system along with the differential of the switch will determine how often the pump runs.
  • Factory preset options are available. Please contact your salesperson or distributor for specifications and a custom part number.
  • Adjustments can be made to the switch by removing the round cover and turning the flat head screw. Clockwise adjustments will lower the Set point (bring the setpoint closer to atmosphere). Counter clockwise adjustments will raise the setpoint (take the setpoint deeper into vacuum). Adjusting preset switches is not recommended. Do not back out the flat head screw above flush with the body.
Model N/A V-5300
Mounting Style N/A Flush Mount N/A Flush Mount N/A Panel Mount 1/8-27 NPS N/A Panel Mount 1/8-27 NPS N/A Manifold Mount
Port Connection N/A Barb for 1/16" I.D. Tubing N/A Barb for 1/16" I.D. Tubing N/A Barb for 1/16" I.D. Tubing N/A Barb for 1/16" I.D. Tubing N/A Manifold
Switch Selection N/A 0.1 AMP N/A 4 AMP N/A 0.1 AMP N/A 4 AMP N/A 0.1 AMP
Features N/A
  • Adjustment Cap included to protect adjustment screw
  • Terminal Cap included to protect terminals
  • Laser Engraved date code
  • Subminiature Size
  • Made and tested in the USA
  • Presets available
    •      		N/A
  • Adjustment Cap included to protect adjustment screw
  • Terminal Cap included to protect terminals
  • Laser Engraved date code
  • Subminiature Size
  • Made and tested in the USA
  • Presets available
    •      		N/A
  • Adjustment Cap included to protect adjustment screw
  • Terminal Cap included to protect terminals
  • Laser Engraved date code
  • Subminiature Size
  • Made and tested in the USA
  • Presets available
    •      		N/A
  • Adjustment Cap included to protect adjustment screw
  • Terminal Cap included to protect terminals
  • Laser Engraved date code
  • Subminiature Size
  • Made and tested in the USA
  • Presets available
    •      		N/A
  • Adjustment Cap included to protect adjustment screw
  • Terminal Cap included to protect terminals
  • Laser Engraved date code
  • Subminiature Size
  • Made and tested in the USA
  • Presets available
    •
    Materials N/A Housing: Polysulfone
    Diaphragm: Polyurethane
    Spring: Stainless Steel or Music Wire
    UL N/A #E12252
    CSA Certified File N/A #LR41372
    UL, CSA N/A 0.1 A, 125 Vac N/A 1/10 HP, 250 VDC 4 A 125, 250, or 277 Vac N/A 0.1 A, 125 Vac N/A 1/10 HP, 250 VDC 4 A 125, 250, or 277 Vac N/A 0.1 A, 125 Vac
    Port Connections N/A .110" Quick Connect
    Operating Speed N/A 25 ms