Air Logic - F-5300 Series Low Differential Pressure Switch

This pressure switch uses a smaller micro switch that has small terminals coming out the top. The Differential is lower and the electrical cycle life is longer than the standard F5100 switches, however, the overall amperage rating is lower.

Request Quote

Unit of Measure

Items	F530015FM.1B Flush Mount Low Differential Pressure Switch 15 PSI 0.1 AMP	F530015FM Flush Mount Low Differential Pressure Switch 15 PSI 4 AMP	F530015PM.1B Panel Mount 1/8-27 NPS Low Differential Pressure Switch 15 PSI 0.1 AMP	F530015PM Panel Mount 1/8-27 NPS Low Differential Pressure Switch 15 PSI 4 AMP	F530015MM.1B Manifold Mount Low Differential Pressure Switch 15 PSI 0.1 AMP
Description	N/A This pressure switch uses a smaller micro switch that has small terminals coming out the top. The Differential is lower and electrical cycle life is longer than the standard F5100 switches, however the overall amperage rating is lower. Pressure switches apply signal pressure to a diaphragm that is opposed by a spring force. When then pressure signal force is greater than the spring force it reaches its set-point (also called “On” pressure), the internal mechanism moves and changes the electrical state. When the switch trips, the normally open circuit closes and the normally closed circuit opens. The switch will remain in this state until the pressure signal drops below its reset point (also called “Off” pressure) The difference between the “On” pressure and the “Off” pressure is defined as the Differential or Hysteresis of the switch. This is an important characteristic for applications such as pressure switch-controlled compressor systems. For instance, the consumption and capacity of the system along with the differential of the switch will determine how often the compressor runs. Factory preset options are available. Please contact your salesperson or distributor for specifications and a custom part number. Adjustments can be made to the switch by removing the round cover and turning the flat head screw. Clockwise adjustments will raise the Set point. Counter clockwise adjustments will lower the setpoint (on pressure). Adjusting preset switches is not recommended. Do not back out the flat head screw above flush with the body.
Model	N/A F-5300
Adjustment Range	N/A 0.5 to 15 PSI
Mounting Style	N/A Flush Mount	N/A Flush Mount	N/A Panel Mount 1/8-27 NPS	N/A Panel Mount 1/8-27 NPS	N/A Manifold Mount
Port Connection	N/A Barb for 1/16" I.D. Tubing	N/A Barb for 1/16" I.D. Tubing	N/A Barb for 1/16" I.D. Tubing	N/A Barb for 1/16" I.D. Tubing	N/A Manifold
Switch Selection	N/A 0.1 AMP	N/A 4 AMP	N/A 0.1 AMP	N/A 4 AMP	N/A 0.1 AMP
Features	N/A Adjustment Cap included to protect adjustment screw Terminal Cap included to protect terminals Laser Engraved date code Subminiature Size Made and tested in the USA Presets available	N/A Adjustment Cap included to protect adjustment screw Terminal Cap included to protect terminals Laser Engraved date code Subminiature Size Made and tested in the USA Presets available	N/A Adjustment Cap included to protect adjustment screw Terminal Cap included to protect terminals Laser Engraved date code Subminiature Size Made and tested in the USA Presets available	N/A Adjustment Cap included to protect adjustment screw Terminal Cap included to protect terminals Laser Engraved date code Subminiature Size Made and tested in the USA Presets available	N/A Adjustment Cap included to protect adjustment screw Terminal Cap included to protect terminals Laser Engraved date code Subminiature Size Made and tested in the USA Presets available
Materials	N/A Housing: Polysulfone Diaphragm: Polyurethane Spring: Stainless Steel or Music Wire
UL	N/A #E12252
UL, CSA	N/A 0.1 A, 125 Vac	N/A 1/10 HP, 250 VDC 4 A, 125, 250, OR 277 Vac	N/A 0.1 A, 125 Vac	N/A 1/10 HP, 250 VDC 4 A, 125, 250, OR 277 Vac	N/A 0.1 A, 125 Vac
CSA Certified File	N/A #LR41372
Port Connections	N/A .110" Quick Connect
Operating Speed	N/A 25ms

Catalog