- Low Cost
- Subminiature Size
- Low Differential
- Snap-Action Switch
- Fast Response
The V-5100 Series Subminiature Vacuum Switches interface from vacuum to electrical control circuits; they are ideal for low differential vacuum applications. The switches are adjustable 1 to 28" Hg with a maximum signal pressure of 29.9" Hg.
The switches have three electrical terminals: Normally Open, Normally Closed and Common. 15 AMP switches are standard, other amperages are available; see chart below.
Four mounting styles are available: Flush Mount, Manifold Mount, Panel Mount, and Pipe Thread Mount. The Flush Mount has .125" diameter mounting holes for mounting on a flat surface. The Manifold Mount is designed to mount directly on pneumatic circuit boards or manifold subplates; a Buna-N o-ring is supplied. The Panel Mount has a unique thread that goes from 1/8-27 tapered pipe thread to 1/8-27 straight pipe thread; a mounting nut is supplied. The Pipe Thread Mount has 1/8-27 tapered pipe threads.
The switches are provided with a B80 Barb, 10-32 UNF Barbed Fitting, for 1/16" I.D.tubing unless otherwise requested.
Switch Action: Single pole, double throw
Electrical Rating: 15 AMP is standard; no selection number is required. 0.1 to 25 AMP switches are available; see chart
Electrical Switch: UL and CSA Approved, (UL# E12252 N) (CSA File# LR 42370)
Electrical Connections: .187" quick-connect terminal
Operating Speed: Activate or release in 25 milliseconds
Signal Pressure: 29.9" Hg maximum
Adjustment Range: 1 to 28" Hg
Temperature Limits: 40 degrees to 120 degrees F. (4 degrees to 49 degrees C)
10-32 female threads, furnished with barbed fitting:
B80: 10-32 UNF Barbed Fitting for 1/16" I.D. tubing
B85: 10-32 UNF Barbed Fitting for 1/8" I.D. tubing
B86: 10-32 UNF Barbed Fitting for .170" I.D. tubing
F-5100-5-FT-3C: 5 Ft. - 5100 Wire Harness (20 gauge wire & 3 terminal connections)
F-5100-10-FT-3C: 10 FT. - 5100 Wire Harness (20 gauge wire & 3 terminal connections)
Flush Mount: .125" diameter mounting hole; use No. 4 self-tapping or 5-40 screw
Manifold Mount: Two .125" diameter mounting holes; use No. 4 self-tapping or 5-40 screw (A Buna-N o-ring is supplied)
Panel Mount: External 1/8-27 NPT to 1/8-27 NPS, internal threads are 10-32 UNF. 7/16" diameter mounting hole is required. (A mounting nut is supplied)
Pipe Thread Mount: 1/8-27 male tapered tapered pipe threads with 10-32 UNF internal threads