M-5000 Series Modular Manifold

  • Modular Dovetail Design
  • Miniature Size
  • Low Cost

Modular Manifold sell sheet

Air Logic M-5000 Series Modular Manifold
The Modular Manifold is designed for instrumentation and industrial applications. The Unique Modular Dovetail design allows the manifold block to be used as an individual unit or assembled into a modular combination of pneumatic components.
The Modular Manifold is available in two models: 
  • The standard model and the filtered model.
  • The standard model is unfiltered

The filtered model contains four stainless steel filters in the side ports:

  • The micron size is 380.
  • The top cover is unfiltered

The Manifold Block contains four individual dovetail slides and one top cover that will accept a various assortment of threaded ports or blanks.

Port Connections Available:

  • Threaded Port and Top Cover
  • Blank Slide and Blank Top Cover
  • Connector
  • Union
  • Gauge Port
  • Push-in Fitting
The Modular Dovetail Wall Mount Bracket is available for wall or cabinet mounting. The Pneumatic Accessories include the modular manifold block, the modular precision pressure, and preset regulators, pressure or vacuum switches, and pressure or vacuum gauges by combining the pneumatic accessories pneumatic circuits and systems can be assembled into one Modular Manifold System.

Patent Number 5,217,260

Maximum Supply: 150 PSI
Operating Temperature: 40º to 150ºF (4º to 66ºC)
Recommended Filtration: 5 Micron
Capacity: 1 Cubic inch

Housing: Glass filled Celcon
O-Rings: Buna N Silicone Nitrite
Filter: Stainless Steel 304, Micron size 380

Port Connections

Threaded Dovetail: A Modular Dovetail Slide with 10-32 UNF, 18-27 NPT, 1/4-18 NPT thread sizes. The 1/8" and 1/4" gauge port is available.
Union Dovetail: A Modular Dovetail Slide with a thru hole joining two units together with a common air supply
Connecting Dovetail: A Modular Connecting Dovetail Slide with no hole, joining two units with no common air supply.
Blank Dovetail: A Blank Dovetail Slide is supplied when the port is not in use.
Push-in Fitting Dovetail: Available for 5/32”, 3/16", 1/4”, 5/16”, 4mm and 6mm O.D. Tubing.
Gauge Dovetail: A Modular Dovetail Slide is supplied with 1/8-27 NPT or 1/4-18 NPT thread sizes. The Dovetail Slide has the word GAUGE molded into the slide.
Top Cover: The top cover is available in various combinations, 10-32 UNF, 1/8-27 NPT or 1/4-18 NPT thread sizes. The 1/4" and 1/8" contain a brass hoop insert. During assembly, fittings should be finger tight plus one turn. A Blank Top Cover is available when porting is not desired.


Base Mounting: .115 diameter mounting homes - use 4-40 mounting screws.
Wall Mount: Modular Dovetail wall mount.