Air Logic
Air Logic
5102 Douglas Ave
Racine, WI 53402
Phone: (262) 639-9035
Toll Free: (800) 558-5950
Email: Info@Air-logic.com
Website: https://air-logic.com
Print Back
Molded orifices are the simplest method of flow control and are one of Air Logic's best-selling product lines. They work on the principal of Flow Restriction with the orifice diameter being identified in the part number and by color codes assigned to each orifice size. In addition to orifice diameter, Air Logic controls many smaller factors that have an impact on the total restriction of the orifice. This is why Air Logic's orifices are trusted to provide accurate and reliable flow performance across a variety of different markets. All of the Air Logics products are precision molded, assembled and tested in America.
Unit of Measure

Specifications

Brands

 N/A Air Logic

Nominal Orifice Size

 N/A 0.020 in

Tubing Inside Diameter (ID)

 N/A 1/16 in

Color

 N/A Blue

Connection Type

 N/A Barbed

Wetted Material(s)

 N/A Polysulfone (PSU)

Maximum Pressure

 N/A 125 psi8.6 bar
Typical Tube Retention Pressure1 N/A 125 psi8.6 bar

Nominal Flow Coefficient (Cv)

 N/A 0.0114

Recommended System Filtration

 N/A 43 µm

Installation Method

 N/A Push-In

EU RoHS 2 (Directive 2011/65/EU with amendment (EU) 2015/863)

 N/A Yes

REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) Compliant

 N/A Yes

Features

 N/A Molded

Additional Information

 N/A Barbed connections are a clean, time tested and cost efficient method of connection. The hoop strength of the tube holds around the barbed fitting. Air Logic's first barb is free of a parting line to create a good seal, additional barbs increase holding force for tube retention. Barbed connections are free of lubrication or thread sealant used in other styles of connection. Simply push the tube over the barb and the connection is complete. Straight ports are generally used with 1/16" ID tubing, but may also be used in a captured design with an external O-ring seal (not included).

Orifices are Factory tested in the direction marked on the product. The product will function in either direction, but using the product in the indicated direction will improve accuracy of the flow control. Orifices are non-adjustable and tamperproof method of flow control. Orifices are sometimes called Flow Restrictors, Snubbers, Pneumatic resistors, Flow reducers, Flow dampeners. Applications include all types of miniature, pneumatic, or fluidic systems (examples: coffee makers, gas analyzers, medical beds, and printing systems).
  • 1 Subject to tubing specification