Brands |
N/A Air Logic |
Filter Size |
N/A 43 µm |
Nominal Orifice Size |
N/A 0.006 in |
Tubing Inside Diameter (ID) |
N/A 1/16 in |
Color |
N/A Red |
Connection Type |
N/A Barbed |
Wetted Material(s) |
N/A Polysulfone (PSU) Stainless Steel (SS) |
Maximum Pressure |
N/A 125 psi8.6 bar |
Typical Tube Retention Pressure1 | N/A 125 psi8.6 bar |
Filtration |
N/A 43 µm |
Installation Method |
N/A Push-In |
EU RoHS 2 (Directive 2011/65/EU with amendment (EU) 2015/863) |
N/A Yes |
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) Compliant |
N/A Yes |
Additional Information |
N/A
Barbed connections are a clean, time tested and cost efficient method of connection. The hoop strength of the tube holds around the barbed fitting. Air Logic's first barb is free of a parting line to create a good seal, additional barbs increase holding force for tube retention. Barbed connections are free of lubrication or thread sealant used in other styles of connection. Simply push the tube over the barb and the connection is complete. Orifices are Factory tested in the direction marked on the product. Color indicates the orifice diameter and a deboss indicates the filter mesh size. Orifices are non-adjustable and tamperproof method of flow control. Filters are a flat stainless steel weave meant to work in tandem with system-wide filtration. Filtered orifices protect against debris generated inside of a system or device (Examples: Polytetrafluoroethylene (PTFE) tape debris during assembly, broken O-rings from valves, machining chips from threads). |